MAG 50 (600636500) Magnetic core drill

(220-240 V / 50 - 60 Hz); Plastic Carry Case

MAG 50 (600636500) Magnetic core drill
Order no.: 600636500 EAN: 4007430238214
Rated input power:
1200 W
Max. drill-Ø with core drill:
50 mm / 2 "
Max. drill-Ø with spiral drill:
20 mm / 3/4 "
Maximum drilling depth:
50 mm / 2 "
No-load speeds:
100 - 250 / 200 - 450 rpm
Bit retainer:
Morse taper MK 2 / Weldon shaft 19 mm (3/4")
Max. magnetic holding force:
12250 N
  • Magnetic core drill with large depth of feed, therefore suitable for use of core drills, spiral drills and countersinks
  • Robust Metabo marathon motor with internal wiring for long service life
  • Clockwise/anti-clockwise rotation with thread cutter
  • Durable two-speed gearbox with oil bath lubrication for ideal speeds
  • Integrated coolant container for easy to dose internal cooling of the core drill
  • Bright LED light for easy alignment in poor light conditions
more product information
 Shop Online
Manual Spare-parts list
  • Magnetic core drill with large depth of feed, therefore suitable for use of core drills, spiral drills and countersinks
  • Magnetic base with high holding power permits working on vertical surfaces and overhead
  • Robust Metabo marathon motor with internal wiring for long service life
  • Vario-Tacho-Constamatic (VTC)-Full Wave Electronics for work with materials requiring customised speeds, which remain constant under load
  • Clockwise/anti-clockwise rotation with thread cutter
  • Durable two-speed gearbox with oil bath lubrication for ideal speeds
  • Integrated coolant container for easy to dose internal cooling of the core drill
  • Bright LED light for easy alignment in poor light conditions
  • Swarf protection can be fixed without tools and protects the user from metal shavings and tool contact
  • Protective circuit starts motor only if the magnet is activated
  • Overload protection: protects the motor from overheating
  • Restart protection: prevents unintentional start-up after power supply interruption
  • Lockable slide for comfortable tool change
  • Handle for easy carrying and lifting
  • Resistant mains cable (5 m) with rubber shroud
The machine shown may differ in equipment and technical details depending on the configuration.
Kindly pay attention to delivery scope and product description.
Accessories included only if listed in the delivery scope.
Characteristics
Rated input power
1200 W
Output power
620 W
Max. drill-Ø with core drill
50 mm / 2 "
Max. drill-Ø with spiral drill
20 mm / 3/4 "
Maximum drilling depth
50 mm / 2 "
Thread cutting
M 16
No-load speeds
100 - 250 / 200 - 450 rpm
Speeds at rated load
250 / 450 rpm
Bit retainer
Morse taper MK 2 / Weldon shaft 19 mm (3/4")
Weight
12.7 kg / 28 lbs
Cable length
5 m / 16 ft
Torque
90 / 50 Nm // 797 / 443 in-lbs
Max. depth of feed
160 mm / 6 5/16 "
Max. magnetic holding force
12250 N
Dimensions of the magnet base
90 x 190 mm // 3 9/16 x 7 1/2 "
Height carriage lowest position
457 mm / 18 "
Height carriage topmost position
610 mm / 24 "
Vibration
Drilling in metal
2.5 m/s²
Uncertainty of measurement K
1.5 m/s²
Noise emission
Sound pressure level
79 dB(A)
Sound power level (LwA)
92 dB(A)
Uncertainty of measurement K
3 dB(A)
  • Industrial holder for Weldon shank 19 mm
  • Ejector pins 75 and 100 mm
  • MK 2 drift key
  • Safety strap
  • Hexagon socket wrench SW 5
  • Swarf protection guard
  • Transport case
 
In order to design the website in an optimal manner and to continuously improve it, Metabo uses cookies. If you continue using the website, you agree to the use of cookies. More information