MAG 32 (600635500) Magnetic core drill

(220-240 V / 50 - 60 Hz); Plastic Carry Case

Order no.: 600635500 EAN: 4007430238207
Rated input power:
1000 W
Max. drill-Ø with core drill:
32 mm / 1 1/4 "
Max. drill-Ø with spiral drill:
13 mm / 1/2 "
Maximum drilling depth:
50 mm / 2 "
No-load speeds:
700 rpm
Bit retainer:
Weldon shaft 19 mm (3/4")
Max. magnetic holding force:
12250 N
  • Magnetic core drill with large depth of feed, therefore suitable for use of core drills, spiral drills and countersinks
  • Robust Metabo marathon motor with internal wiring for long service life
  • Integrated coolant container for easy to dose internal cooling of the core drill
  • Bright LED light for easy alignment in poor light conditions
  • Magnetic core drill with large depth of feed, therefore suitable for use of core drills, spiral drills and countersinks
  • Magnetic base with high holding power permits working on vertical surfaces and overhead
  • Robust Metabo marathon motor with internal wiring for long service life
  • Integrated coolant container for easy to dose internal cooling of the core drill
  • Bright LED light for easy alignment in poor light conditions
  • Swarf protection can be fixed without tools and protects the user from metal shavings and tool contact
  • Protective circuit starts motor only if the magnet is activated
  • Restart protection: prevents unintentional start-up after power supply interruption
  • Lockable slide for comfortable tool change
  • Handle for easy carrying and lifting
  • Resistant mains cable (5 m) with rubber shroud
The machine shown may differ in equipment and technical details depending on the configuration.
Kindly pay attention to delivery scope and product description.
Accessories included only if listed in the delivery scope.
Characteristics
Rated input power
1000 W
Output power
520 W
Max. drill-Ø with core drill
32 mm / 1 1/4 "
Max. drill-Ø with spiral drill
13 mm / 1/2 "
Maximum drilling depth
50 mm / 2 "
No-load speeds
700 rpm
Speeds at rated load
450 rpm
Bit retainer
Weldon shaft 19 mm (3/4")
Weight
11.9 kg / 26.2 lbs
Cable length
5 m / 16 ft
Torque
50 Nm // 443 in-lbs
Max. depth of feed
160 mm / 6 5/16 "
Max. magnetic holding force
12250 N
Dimensions of the magnet base
90 x 189 mm // 3 9/16 x 7 1/2 "
Height carriage lowest position
343 mm / 13 1/2 "
Height carriage topmost position
490 mm / 19 9/32 "
Vibration
Drilling in metal
2.5 m/s²
Uncertainty of measurement K
1.5 m/s²
Noise emission
Sound pressure level
85 dB(A)
Sound power level (LwA)
98 dB(A)
Uncertainty of measurement K
3 dB(A)
  • Ejector pin 75 mm
  • Safety strap
  • Hexagon socket wrench SW 4
  • Swarf protection guard
  • Transport case
 
In order to design the website in an optimal manner and to continuously improve it, Metabo uses cookies. If you continue using the website, you agree to the use of cookies. More information