Charger

Chargers, Non-EU

		Order no.
	Charger ASC 30-36 V, 14.4-36 V,"AIR COOLED", AUS/NZ (627047000) Monitored charging with microcontroller Battery diagnosis Charge time approximately 30 minutes at 1.5 Ah "AIR COOLED" function For charging all Li-Power Compact, Li-Power Plus, Li-Power Extreme battery packs Monitored charging with microcontroller: the battery pack is charged with 2.5 ampere with constant monitoring of voltage flow, temperature flow and maximum temperature. The charger ends the charging process immediately after full charging. Thus, there is no overcharging and the life of the battery pack increases. Charger switches to compensation charge: to conserve the capacity, the battery pack is charged for 1 second every 45 seconds with 2.5 ampere. "AIR COOLED" function: the patented principle is based on air-cooling the battery pack during the charging process. The battery packs are gently cooled down to the required charging temperature, and then during the charging process are constantly maintained at optimum temperature. With this principle, a higher tool life of the battery packs and up to 30% shorter total charging time can be achieved. Mains voltage: 230 - 240 V Mains frequency: 50 - 60 Hz	627047000

	Charger LC 40, 10.8 V, AUS/ NZ (627065000) Charger AUS/ NZ version Especially for the PowerMaxx 12 Mains voltage: 230 - 240 V Mains frequency: 50 - 60 Hz	627065000

	Charger AC 30 Plus, 4.8-18 V, "AIR COOLED", AUS (627278000) Monitored charging with microcontroller Battery diagnosis Charge time approximately 30 minutes at 1.4 Ah "AIR COOLED" function Monitored charging with microcontroller: the battery pack is charged with 2.5 ampere with constant monitoring of voltage flow, temperature flow and maximum temperature. The charger ends the charging process immediately after full charging. Thus, there is no overcharging and the life of the battery pack increases. Charger switches to compensation charge: to conserve the capacity, the battery pack is charged for 1 second every 45 seconds with 2.5 ampere. For charging all old and new Metabo NiCd and NiMH battery packs of 4.8 V -18 V, as well as the new Li-Ion battery packs of 12 V-18 V "AIR COOLED" function: the patented principle is based on air-cooling the battery pack during the charging process. The battery packs are gently cooled down to the required charging temperature, and then during the charging process are constantly maintained at optimum temperature. With this principle, a higher tool life of the battery packs and up to 30% shorter total charging time can be achieved. Mains voltage: 230 - 240 V Mains frequency: 50 - 60 Hz	627278000

Chargers

		Order no.
	Charger LC 40, 10.8 V, EU (627064000) For charging Li-ion battery packs 10.8 V Charging current 2.3 A Mains voltage: 230 - 240 V Mains frequency: 50 - 60 Hz	627064000

	Quick charger ASC Ultra, 14.4-36 V, "AIR COOLED", EU (627265000) For charging all Li-Power and LiHD slide-on battery packs (14.4 V - 36 V). Patented “AIR COOLED“ charging technology Charging current 6.5 A Very low stand-by input power Processor-controlled charging management system Charge time approximately 30 minutes at 1.5 Ah; approximately 35 minutes at 4.0 Ah Mains voltage: 230 - 240 V Mains frequency: 50 - 60 Hz	627265000

	Charger LC 60, 7.2 V, EU (627306000) For charging Li-ion battery packs 7.2 V Charging current 2.4 A Mains voltage: 230 - 240 V Mains frequency: 50 - 60 Hz	627306000