Products
Multi-Purpose Hammer UHE 28 Multi
Article Number: 6.00361.00
- Suitable for bits and accessories with SDS Plus shank end or cylindrical shaft (without impact)
- Hammer stop
- Rotation stop
- Metabo "Quick" drill chuck change
- Metabo CODE! system: Electronic theft protection, code activated key (accessory)
- Forward and reverse running
- Vario Tacho Constamatic (VTC) full-wave electronics
- Thumbwheel for preselection of speed
- Robust Metabo Marathon motor
- Two-speed gear unit
- Pneumatic high-performance hammer mechanism
- Die cast aluminum gear housing
- Ergonomic housing design for fatigue-proof operation
- Rubber-coated handle
- Metabo S-automatic torque limiting clutch
- Metabo winding protection grid
- Overload protection
- No-volt release switch
- Auto-stop carbon brushes
- Brush wear indicator
Specification:
| Torque |
22 Nm/195 in-lbs/8 Nm/71 in-lbs |
| Drill diameter in |
|
| - Concrete with hammer bits |
28 mm |
| - Brickwork with drill bits |
80 mm |
| - Steel |
16 mm/8 mm |
| - Softwood |
40 mm/20 mm |
| Speeds at no load |
0 - 950/0 - 2.600 /min |
| Rated input power |
1.010 W |
| Output power |
600 W |
| Speed at rated load |
950/min/2.600 /min |
| Maximum impact rate |
4.400 /min |
| Single-blow energy |
0 - 2,4 J |
| Collar diameter |
43 mm |
| Bit retainer |
SDS Plus |
| Chuck capacity |
1,5 - 13 mm |
| Weight |
2,8 kg |
Scope of delivery:
- Hammer chuck for tools with SDS Plus shank bit
- Keyless drill chuck for standard drill bits
- Additional handle
- Drill depth-stop
- Plastic case
|
Product Catalogue
Hammers
UHE 28 Multi
|
